![]() ©2010 |
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Technical Manual, U.S. War Department, October 1, 1944
[DISCLAIMER: The following text and illustrations are taken from a WWII U.S. War Department
Technical Manual. As with all wartime manuals, the text may be incomplete or inaccurate. No attempt has been made to
update or correct the contents of the original technical manual. Any views or opinions expressed do not necessarily
represent those of the website.]
Chapter IX: Weapons Section II: Infantry Weapons 2. MACHINE GUNS. a. (1) The basic machine gun is the "Nambu," Model 11 (1922) 6.5-mm light machine gun, which is a modification of the French Hotchkiss. Other types that have been directly copied are the Lewis, the Vickers, and in one instance the Oerlikon. These weapons will be found listed in the following pages. A matter of note is that Japanese machine guns generally do not employ slow initial extraction and therefore stoppages are frequent. The Japanese, in order to overcome this, have employed various methods of oiling ammunition either by automatic or gravity oilers, built directly on to the weapon, or oiling ammunition before loading into box magazines. To complicate the ammunition picture even further, they have indicated that their 6.5-mm machine guns normally use a reduced charge, possibly to overcome stoppage and to avoid pre-oiling. Also their 7.7-mm light and heavy machine guns are built to use either a rimmed, semirimmed or rimless ammunition, which, with one exception noted in the following pages, is not interchangeable. (2) Submachine guns. No submachine gun of Japanese manufacture, comparable to the Thompson, M3 or Reising has been found, although several German Solothurn 7.63-mm (.30 cal.) and 9-mm (.35 cal.) SMGs and Schmeisser MP 28II, SMGs have been recovered.
b. Model 11 (1922) 6.5-mm light machine gun. (1) General description. This
is a gas operated, air-cooled, machine gun with hopper feed which holds 6-5 round clips
of ammunition (fig. 178). Positive identification can be made from the following markings
which appear on the top of the
receiver
(2) Characteristics.
(3) Ammunition. Clips of 5 rounds standard or reduced charge 6.5-mm ball rifle ammunition are used.
c. Model 96 (1936) 6.5-mm light machine gun. (1) General description. This
is a gas-operated, magazine-fed, air-cooled, full automatic light machine gun (fig. 179). Its
appearance is somewhat similar to that of the British Bren. The
markings
(2) Characteristics.
(3) Ammunition. 6.5-mm semirimmed cartridges in boxes marked (G) are provided for this weapon. These have the same dimensions as the standard 6.5-mm cartridge although the Japanese have indicated that these have a reduced propelling charge. The regular rifle ammunition may cause stoppages, but can safely be used. d. Model 99 (1939) 7.7-mm light machine gun. (1) General description. This is a gas-operated, magazine-fed, air-cooled, light machine gun (fig. 180).
Its appearance is almost identical to model 96 with the two exceptions, that it has an
adjustable rear monopod and a barrel locking nut instead of a barrel catch. It can
further be identified by the markings on the top of the
receiver (2) Characteristics.
(3) Ammunition. The weapon uses 7.7-mm rimless ammunition only. This ammunition can be used in model 92 heavy machine gun, but the semirimmed ammunition for model 92 cannot be used in this gun.
e. Model 92 (1932) 7.7-mm Lewis type MG. (1) General description. This
weapon is an air-cooled, gas operated, drum-fed, full automatic gun. (See fig. 181.) With
the exception that the cocking handle is on the left and that there is no provision
allowing it to be changed to the right side of the gun, if so desired, this weapon is a
duplicate of the British Lewis. It can easily be recognized by its similarity to the latter weapon. The
markings
(2) Characteristics.
(3) Ammunition. 7.7-mm rimmed ammunition, Japanese copy of British 0.303, and British MK VII .303 in. ball ammunition. f. Model 92 (1932) 7.7-mm heavy machine gun. (1) General description. This is the standard Japanese heavy machine gun. It is a gas-operated, strip-fed, full automatic, air-cooled, modified Hotchkiss-type weapon (fig. 182).
Its forerunner, which may still be used, was the Model 3 (1914) which
fired 6.5-mm ammunition. Markings which appear on the
receiver (2) Characteristics.
(3) Ammunition. This gun uses 7.7-mm semirimmed ammunition (ball, tracer, AP and incendiary). It can also use the 7.7 rimless ammunition if loaded on strips.
g. Model 93 (1933) 13-mm machine gun. (1) General description. This is a
gas-operated, air-cooled, magazine-fed, full automatic, Hotchkiss type weapon (fig. 183). While
it is primarily an antiaircraft gun, it can be used for ground purposes. This weapon has been
found in single and twin mounts, (see sec. III, par. 3). The
markings
(2) Characteristics.
(3) Ammunition. Ball, armor piercing, and tracer cartridges are provided.
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
LONE SENTRY | Home Page | Site Map | What's New | Search | Contact Us |